High volume sampler for a sampling of PM10 particles with 1.27 m3-minute suction flow in accordance with norm UNI-EN 12341 (reference sampler) and with US EPA CFR 40 part 50.11. When used with the aid of simple adapter kits, they can be replaced between one sampler and another for simple, versatile use. All sampling phase settings are electronically programmed. Samplings can be set by time, volume, and cyclical sampling, from quadrant sector sampling. All detected data are stored in the memory and transferred to a PC or to an optional local printer with RS and USB ports, with the possibility of remote GSM/GPRS control (optional).

The sequential sampler for PM10 and PM2,5 particles consist of a system contained in an epoxy-coated, climate-resistant aluminum structure including a sampling unit, flow controller, and precision mechanical components for the handling of up to sixteen 47mm filters, housed in inert-material filter holders. It is provided with a twin-head vacuum pump, with a free blowing air volume of up to 50 l/min capable of maintaining the sampling conditions constantly to 38,3 l/min in accordance with regulation.

The DustCheck DPM16 sequential sampler consists of two compartments, physically separated and insulated with innovative polyurethane closed-cell materials. The reference standard requires the temperature of the sampled filters to be kept to a value not exceeding 23°C. This feature is capable of adjusting and keeping the temperature constant in the storage compartment of the sampled filters, allowing filters to be properly preserved at the desired conditions.